User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 435 of 825
Ceragon Proprietary and Confidential
Figure 348: SOAM MEP DB Table
Table 78 lists and describes the parameters displayed in the SOAM MEP DB table.
To return to the SOAM MEP page, click Back to MEP.
Note:
To display these parameters in a separate window for a specific
remote MEP, select the RMEP ID and click
View
.
Table 78: SOAM MEP DB Table Parameters
Parameter
Definition
RMEP ID
The remote MEP ID.
RMEP Operational State
The operational state of the remote MEP.
RMEP Last rx CCM MAC
Address
The MAC Address of the interface on which the remote MEP is
located.
RMEP Last CCM OK or Fail
Timestamp
The timestamp marked by the remote MEP indicated the most
recent CCM OK or failure it recorded. If none, this field indicates the
amount of time since SOAM was activated.
RMEP Last rx CCM RDI
Indication
Displays the state of the RDI (Remote Defect Indicator) bit in the
most recent CCM received by the remote MEP:
•
True
–
RDI was received in the last CCM.
•
False
–
No RDI was received in the last CCM.
RMEP Last rx CCM Port
Status TLV
The Port Status TLV in the most recent CCM received from the
remote MEP.
Reserved for future use.
RMEP Last rx CCM
Interface Status TLV
Displays the operational status of the interface on which the remote
MEP has been defined.
RMEP Last rx CCM Chassis
ID Format
Displays the format of the remote chassis (always the MAC address).
RMEP Last rx CCM Chassis
ID
Displays the MAC address of the remote chassis.
