User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 292 of 825
Ceragon Proprietary and Confidential
Parameter
Definition
TX bytes Layer 1 exceed
threshold (sec)
The number of seconds the TX bytes exceeded the specified threshold
during the interval. For instructions on setting the threshold, see
Setting the Ethernet Port TX Threshold
Invalid data flag
Indicates whether the values received during the measured interval
are valid. An x in the column indicates that the values are not valid (for
example, because of a power surge or power failure that occurred
during the interval).
To clear the PMs, click
Clear All
.
6.5.3.2
Enabling or Disabling Gathering of Port TX PM Statistics per Interface
To select the interfaces for which to gather and display Port TX PMs:
1 In the Ethernet Port TX PM Report page, click
PM Admin
. The Ethernet PM
Port Admin page opens.
Figure 215: Ethernet PM Port Admin Page
2 Select the interface.
3 Click
Enable Port PM
or
Disable Port PM
to enable or disable the gathering of
Port TX PMs on the selected interface.
4 Click
Close
.
6.5.3.3
Setting the Ethernet Port TX Threshold
The
TX bytes Layer 1 exceed threshold (sec)
column shows, for each interval, the
number of seconds the TX bytes exceeded the specified threshold during the
interval:
To view and set this threshold:
1 In the Ethernet Port TX PM Report page, click
Threshold
. The Ethernet Port Tx
Threshold page opens.
