Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 254 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 254 of 825
Ceragon Proprietary and Confidential
◦
To display reports in daily intervals, select 24 hours .
Table 40 describes the Modem MSE PMs.
Note: To display the same parameters for a specific interval in a separate
page, select the interval in the Modem MSE PM table and click
View .
Table 40: Modem MSE PMs
Parameter Definition
Interval For 24-hour intervals, displays the date of the interval. For 15-
minute intervals, displays the date and ending time of the interval.
Min MSE (dB) Displays the minimum MSE in dB, measured during the interval. A
0 in this field and an X in the
Integrity field may also indicate that
the modem was unlocked during the entire interval.
Max MSE (dB) Displays the maximum MSE in dB, measured during the interval. A
0 in this field and an X in the
Integrity field may also indicate that
the modem was unlocked.
Exceed threshold seconds Displays the number of seconds the MSE exceeded the MSE PM
threshold during the interval. The MSE PM is configured in the
Radio Thresholds page. See
Configuring BER Thresholds and
Displaying Current BER .
Integrity Indicates whether the values received at the time and date of the
measured interval are reliable. An X in the column indicates that
the values are not reliable due to a possible power surge or power
failure that occurred at that time. An X and a 0 value in the
Max
MSE field may also indicate that the modem was unlocked.
To set the Modem MSE PM thresholds, click Thresholds . The Modem MSE
Thresholds Configuration – Edit Page opens. For each radio, specify the modem
MSE (Mean Square Error) threshold for calculating MSE Exceed Threshold
seconds, and click
Apply .
Figure 188: Modem MSE Thresholds Configuration – Edit Page