Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 326 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 326 of 825
Ceragon Proprietary and Confidential
7.6.3.2 Editing a Service Bundle Shaper Profile
To edit a service bundle shaper profile:
1 Select
Ethernet > QoS > Shaper > Service Bundle Profiles . The Service Bundle
Shaper Profile page opens ( Figure 247 ).
2 Select the profile you want to edit and click Edit . The Service Bundle Shaper
Profile – Edit page opens. This page is similar to the Service Bundle Shaper
Profile – Add page ( Figure 248 ). You can edit any parameter except the Profile
ID .
3 Modify the profile.
4 Click
Apply , then Close .
7.6.3.3 Deleting a Service Bundle Shaper Profile
You cannot delete a service bundle shaper profile that is assigned to a service
bundle. You must first remove the profile from the service bundle, then delete the
profile.
To delete a service bundle shaper profile, select the profile in the Service Bundle
Shaper Profiles Configuration table (
Figure 247 ) and click Delete . The profile is
deleted.
To delete multiple service bundle shaper profiles:
1 Select the profiles in the Service Bundle Shaper Profiles Configuration table or
select all the profiles by selecting the check box in the top row.
2 Click Delete . The profiles are deleted.
7.6.4 Assigning a Queue Shaper Profile to a Queue
To assign a queue shaper profile to a queue:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).
2 Select an interface in the Ethernet Logical Port Configuration table and click
Shaper . The Logical Interfaces – Shaper page opens, with the Egress Queue
Shaper Configuration table open by default. All queue shaper profiles defined
in the system are listed in the table.