User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 664 of 825
Ceragon Proprietary and Confidential
•
Rem System Cap Supported
- The bitmap value used to identify which system
capabilities are supported on the peer. The bitmap is defined by the following
parameters:
◦
0 - other
◦
1 - repeater
◦
2 - bridge
◦
3 - wlanAccessPoint
◦
4 - router
◦
5 - telephone
◦
6 - docsisCableDevice
◦
7 - stationOnly
◦
8 - cVLANComponent
◦
9 - sVLANComponent
◦
10 - twoPortMACRelay
•
Rem System Cap Enabled
- The bitmap value used to identify which system
capabilities are enabled on the peer. The bitmap is defined by the following
parameters:
◦
0 - other
◦
1 - repeater
◦
2 - bridge
◦
3 - wlanAccessPoint
◦
4 - router
◦
5 - telephone
◦
6 - docsisCableDevice
◦
7 - stationOnly
◦
8 - cVLANComponent
◦
9 - sVLANComponent
◦
10 - twoPortMACRelay
•
Remote Changes
- Indicates whether there are changes in the peer's MIB, as
determined by the variable
remoteChanges
. Possible values are:
◦
True
- Changes have taken place in the peer's MIB since the defined agent-
start-time.
◦
False
- No changes have taken place in the peer's MIB since the
defined agent
-start-time
.
19.2.6.2
Displaying the LLDP Remote Management Data per Port (CLI)
To display remote LLDP management data from a specific port, starting from a
specific time, enter the following command in root view. If no time is specified, all
data is displayed.
root> ethernet lldp agent-remote-mng-show agent-start-time
<agent-start-time> interface eth slot <slot> port <port>
