User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 578 of 825
Ceragon Proprietary and Confidential
Parameter
Input Type
Permitted
Values
Description
s-vlan cos
preservation mode
Variable
enable
disable
Select enable or disable to determine
whether the original S-VLAN CoS value
is preserved or restored for
frames egressing the service point.
•
enable - the S-VLAN CoS value of
frames egressing the service point is
the same as the value when the
frame entered the service.
•
disable - the S-VLAN CoS value of
frames egressing the service point is
set at whatever value might have
been re-assigned by the interface,
service point, or service, or
whatever value results from
marking (see
The following command enables S-VLAN CoS preservation for Service Point 1 on
Service 37:
service[37]>sp svlan-cos-preservation-mode set spid 1 mode
enable
The following command disables S-VLAN CoS preservation for Service Point 1 on
Service 37:
service[37]>sp svlan-cos-preservation-mode set spid 1 mode
disable
Configuring Service Bundles (CLI)
You can use service bundles to personalize common sets of egress queue
attributes that can be applied to multiple service points. In this version only one
service bundle is supported.
To assign a service point to a service bundle, go to service view for the service and
enter the following command:
service[SID]>sp egress-service-bundle set spid 1 service-
bundle-id <service-bundle-id>
Table 144: Service Bundle CLI Parameters
Parameter
Input Type
Permitted Values
Description
sp-id
Number
1-32 for P2P and MP
services.
1-30 for MNG
services.
The Service Point ID.
service-bundle-id
Number
1
–
63
The service bundle
assigned to the service
point.
