User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 711 of 825
Ceragon Proprietary and Confidential
22.8
Activating the Radio Logger (CLI)
The Radio Logger, when it is activated, gathers technical data about the radio and
its operation. By default, the Radio Logger is inactive. It should only be activated
by technical support personnel, or by the customer upon request of Ceragon’s
Customer Support team. Data gathered by the Radio Logger is added to the Unit
Info file, which can be exported from the unit and sent to Customer Support upon
their request. See
Note:
In order to conserve CPU resources, do not activate the Radio Logger
unless it is necessary for unit diagnostic purposes, and do not leave it
active longer than necessary.
To activate the Radio Logger, enter the following command in root view:
root> logger start logger-type radio logger-duration <1-1440>
slot1 2 port1 1 slot2 2 port2 2
The
logger-duration
parameter is set in minutes. You can activate the logger on
one or (for IP-20C and IP-20C-HP) two radios in a single command. For example,
the following command activates the logger for 40 minutes on both carriers of an
IP-20C or IP-20C-HP device:
root> logger start logger-type radio logger-duration 40 slot1 2
port1 1 slot2 2 port2 2
To display whether the Radio Logger is currently active, enter the following
command in root view:
root> logger get status logger-type radio
For example, the following display indicates the Radio Logger has been set on
both carriers for 20 minutes, and that the Logger is set to run for an additional
1191 seconds:
root> logger get status logger-type radio
Logger status:
Logger duration(in minutes): 20
Logger time left(in seconds): 1191
Active instances list:
Slot 2 Port 1
Slot 2 Port 2
root>
To stop the Radio Logger manually, enter the following command in root view:
root> logger stop logger-type radio
To delete all data that has been saved by the Radio Logger, enter the following
command in root view:
root> logger delete logger files<logger-type>.
Important Note:
Whenever you activate the Radio Logger, any previous Radio
Logger results are deleted.
