User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 421 of 825
Ceragon Proprietary and Confidential
6 If the IP address family is configured to be IPv4, enter the IPv4 address of the
PC or laptop you are using as the FTP server in the
Server IPv4
address
field.
Defining the IP Protocol Version for Initiating Communications
7 If the IP address family is configured to be IPv6, enter the IPv6 address of the
PC or laptop you are using as the FTP server in the
Server IPv6 address
field.
Defining the IP Protocol Version for Initiating Communications
8 In the
Path
field, enter the directory path to which you are uploading the file.
Enter the path relative to the FTP user's home directory, not the absolute
path. If the location is the home directory, it should be left empty. If the
location is a sub-folder under the home directory, specify the folder name. If
the shared folder is "C:\", this parameter can be left empty or populated with
"//".
9 In the
File Name
field, enter the name you want to give to the exported Unit
Information file.
10 Click
Apply
to save your settings.
11 Click
Create
to create the Unit Information file. The following fields display the
status of the file creation process:
◦
File creation status
–
Displays the file creation status. You must wait until
the status is Success to upload the file. Possible values are:
◦
Ready
–
The default value, which appears when no file is being created.
◦
Generating File
–
The file is being generated.
◦
Success
–
The file has been successfully created. You may now upload the
file.
◦
Failure
–
The file was not successfully created.
◦
File creation progress
–
Displays the progress of the current Unit
Information file creation operation.
12 Click
Export
. The upload begins. The following fields display the status of the
upload process:
◦
File transfer status
–
Displays the status of any pending Unit Information
file upload. Possible values are:
◦
Ready
–
The default value, which appears when no file transfer is in
progress.
◦
File-in-transfer
–
The upload operation is in progress.
◦
Success
–
The file has been successfully uploaded.
◦
Failure
–
The file was not successfully uploaded.
If you try to export the file before it has been created, the following error
message appears:
Error #3-Invalid set value
.
If this occurs, wait about two minutes then click
Export
again.
◦
File transfer progress
–
Displays the progress of the current Unit
Information file upload operation.
