User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 197 of 825
Ceragon Proprietary and Confidential
Figure 140: V3 Users - Add Page
3 Configure the SNMP V3 Authentication parameters, as described below.
4 Click
Apply
, then
Close
.
Table 23: SNMP V3 Authentication Parameters
Parameter
Definition
User Name
Enter the SNMPv3 user name.
Password
Enter a password for SNMPv3 authentication. The password must
be at least eight characters.
Authentication Algorithm
Select an authentication algorithm for the user. Options are:
•
None
•
SHA
•
MD5
Encryption (Privacy) Mode
Select an encryption (privacy) protocol for the user. Options are:
•
None
•
DES
•
AES
Access Mode
Select an access permission level for the user. Options are:
•
Read Write User
•
Read Only User
4.4
Configuring Trap Managers
You can configure trap forwarding parameters by editing the Trap Managers
table. Each line in the Trap Managers table displays the setup for a manager
defined in the system.
To configure trap managers:
1 Select
Platform > Management > SNMP > Trap Managers
. The Trap Managers
page opens.
