Ceragon FibeAir IP-20 All-Outdoor Series User Manual Download | Manualshive

Page: 2 / 825

background image

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5

Page 2 of 825

Ceragon Proprietary and Confidential

Notice

This document contains information that is proprietary to Ceragon Networks Ltd. No part of this
publication may be reproduced, modified, or distributed without prior written authorization of
Ceragon Networks Ltd. This document is provided as is, without warranty of any kind.

Trademarks

Ceragon Networks®, FibeAir® and CeraView® are trademarks of Ceragon Networks Ltd., registered in
the United States and other countries.

Ceragon® is a trademark of Ceragon Networks Ltd., registered in various countries.

CeraMap™, PolyView™, EncryptAir™, ConfigAir™, CeraMon™, EtherAir™, CeraBuild™, CeraWeb™,
and QuickAir™, are trademarks of

Ceragon Networks Ltd.

Other names mentioned in this publication are owned by their respective holders.

Statement of Conditions

The information contained in this document is subject to change without notice. Ceragon Networks
Ltd. shall not be liable for errors contained herein or for damage in connection with the furnishing,
performance, or use of this document or equipment supplied with it.

Open Source Statement

The Product may use open source software, among them O/S software released under the GPL or
GPL alike license ("Open Source License"). Inasmuch that such software is being used, it is released
under the Open Source License, accordingly. The complete list of the software being used in this
product including their respective license and the aforementioned public available changes is
accessible at:

Network element site:

ftp://ne-open-source.license-system.com

NMS site:

ftp://nms-open-source.license-system.com/

Information to User

Any changes or modifications of equipment not expressly approved by the manufacturer could void

the user’s authority to operate the equipment and the warranty for such equipment.

Intended Use/Limitation

Fixed point-to-point radio links for private networks.

Authorized to Use

Only entities with individual authorization from the National Regulator to operate the mentioned
radio equipment.

The equipment can be used in the following EU countries:

Austria (AT) - Belgium (BE) - Bulgaria (BG) - Switzerland/Liechtenstein (CH) - Cyprus (CY) - Czech
Republic (CZ) - Germany (DE)

–

Denmark (DK) - Estonia (EE) - Finland (FI) - France (FR) -Greece (GR) -

Hungary (HU) - Ireland (IE)

–

Iceland (IS)

–

Italy (IT)

–

Lithuania (LT) - Luxembourg (LU)

–

Latvia (LV) -

Malta (MT) - Netherlands (NL) - Norway (NO) - Portugal (PT) - Romania (RO) - Sweden (SE) - Slovenia
(SI) - Slovak Republic (SK)

–

United Kingdom (UK)

–

Spain (SP)

–

Poland (PL)

«
1
2
3
4
...
»

Summary of Contents for FibeAir IP-20 All-Outdoor Series


























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FibeAir IP-20 All-Outdoor Series

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands