User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 656 of 825
Ceragon Proprietary and Confidential
root> ethernet abn abn-entity-create abn-name ABN-1 monitored-
interface radio monitored-slot 1 monitored-port 1 control-
interface ethernet control-slot 1 control-port 1 vlan 1
The following command creates an ABN entity in an IP-20C or IP-20C-HP unit with
radio interface 2 as the monitored interface and LAG group lag1 as the control
interface. It also specifies to transmit bandwidth messages on VLAN 55:
root> ethernet abn abn-entity-create abn-name ABN-3 monitored-
interface radio monitored-slot 1 monitored-port 2 control-group
lag1 vlan 55
The following command creates an ABN entity in an IP-20C or IP-20C-HP unit with
HSB protection group rp1 as the monitored interface and Ethernet port 2 as the
control interface. It also specifies to transmit bandwidth messages on VLAN 200:
root> ethernet abn abn-entity-create abn-name ABN-4 monitored-
group rp1 control-interface ethernet control-slot 1 control-
port 2 vlan 200
The following command creates an ABN entity in an IP-20C or IP-20C-HP unit with
HSB protection group rp1 as the monitored interface and LAG group lag1 as the
control interface. It also specifies to transmit bandwidth messages on VLAN 300:
root> ethernet abn abn-entity-create abn-name ABN-5 monitored-
group rp1 control-group lag1 vlan 300
The following command deletes ABN-1:
root> ethernet abn abn-entity-delete abn-name ABN-1
The following command sets the monitoring interval of ABN-1 to 1 second:
root> ethernet abn abn-monitoring-interval-set abn-name ABN-1
period 1
The following command sets the frequency of bandwidth messages regarding
ABN-1 to 10 seconds:
root> ethernet abn abn-period-set abn-name ABN-1 period 5-ten-
seconds
The following command sets the Holdoff time of ABN-1 to 15 seconds:
root> ethernet abn abn-holdoff-set abn-name ABN-1 holdoff 15
The following command clears the messages counter for ABN-1:
root> ethernet abn abn-entity-counter-reset abn-name ABN-1
