User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 379 of 825
Ceragon Proprietary and Confidential
4 In the
Profile
field, select a User Profile. The User Profile defines the user’s
access levels for functionality groups in the system. See
5 In the
Password
field, enter a password for the user. If
Enforce Password
Strength
Configuring the Password Security Parameters
), the
password must meet the following criteria:
◦
Password length must be at least eight characters.
◦
Password must include characters of at least three of the following
character types: lower case letters, upper case letters, digits, and special
characters. For purposes of meeting this requirement, upper case letters at
the beginning of the password and digits at the end of the password are
not counted.
◦
The last five passwords you used cannot be reused.
6 In the
Blocked
field, you can block or unblock the user. Selecting
Yes
blocks
the user. You can use this option to block a user temporarily, without deleting
the user from the system. If you set this option to
Yes
while the user is logged
into the system, the user will be automatically logged out of the system within
30 seconds.
Note:
Users can also be blocked by the system automatically. You can
unblock the user by selecting
No
in the
Blocked
field. See
the General Access Control Parameters
7 Optionally, in the
Expiration date
field, you can configure the user to remain
active only until a defined date. After that date, the user automatically
becomes inactive. To set an expiration date, click the calendar icon and select
a date, or enter a date in the format dd-mm-yyyy.
In addition to the configurable parameters described above, the Access Control
User Accounts page displays the following information for each user:
•
Login Status
–
Indicates whether the user is currently logged into the system.
•
Last Logout
–
The date and time the user most recently logged out of the
system.
To edit a user’s account details, select the user and click
Edit
. You can edit all of
the user account parameters except the
User name
and
password
.
To add a user, click
Add
.
To delete a user, select the user and click
Delete
.
10.5
Configuring RADIUS
This section includes:
•
•
Activating RADIUS Authentication
•
Configuring the RADIUS Server Attributes
•
Viewing RADIUS User Permissions and Connectivity
•
