User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 373 of 825
Ceragon Proprietary and Confidential
10.2
Configuring the Password Security Parameters
To configure enhanced security requirements for user passwords:
1 Select
Platform > Security > Access Control > Password Management
. The
Access Control Password Management page opens.
Figure 288: Access Control Password Management Page
2 In the
Enforce password strength
field, select
Yes
or
No
. When
Yes
is
selected:
◦
Password length must be at least eight characters.
◦
Password must include characters of at least three of the following
character types: lower case letters, upper case letters, digits, and special
characters. For purposes of meeting this requirement, upper case letters at
the beginning of the password and digits at the end of the password are
not counted.
◦
The last five passwords you used cannot be reused.
3 In the
Password change for first login
field, select
Yes
or
No
. When
Yes
is
selected, the system requires the user to change his or her password the first
time the user logs in.
4 In the
Password aging (Days)
field, select the number of days that user
passwords will remain valid from the first time the user logs into the system.
You can enter 20-90, or
No Aging
. If you select
No Aging
, password aging is
disabled and passwords remain valid indefinitely.
5 Click
Apply
.
