Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 381 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 381 of 825
Ceragon Proprietary and Confidential
10.5.3 Configuring the RADIUS Server Attributes
To configure the RADIUS server attributes:
1 Select
Platform > Security > Access Control > Radius > Radius Configuration .
The Radius Configuration page opens ( Figure 294 ).
2 In the Radius Configuration table, select the line that corresponds to the
RADIUS server you want to configure:
◦
Select Server ID 1 to configure the Primary Radius server.
◦
Select Server ID 2 to configure the Secondary Radius server.
3 Click Edit . The Radius Configuration – Edit page opens.
Figure 295: Radius Configuration – Edit Page
4 In the IPV4 address field, enter the IP address of the RADIUS server.
5 In the Port field, enter the port of the RADIUS server.
6 In the Retries field, enter the number of times the unit will try to
communicate with the RADIUS server before declaring the server to be
unreachable.
7 In the Timeout field, enter the timeout (in seconds) that the agent will wait in
each communication with the selected RADIUS server before retrying if no
response is received.
8 In the Secret field, enter the shared secret of the RADIUS server. The string
must be between 22-128 characters long.
9 Click Apply , then Close .
In addition to the configurable parameters described above, the Radius
Configuration page displays the following information for each RADIUS server:
•
Server Id – The server ID of the Radius server:
◦
1 – The primary Radius server.
◦
2 – The secondary Radius server.
• Connectivity Status – The connectivity status of the Radius server in the last
attempted connection:
◦
True – The last connection attempt succeeded.
◦
False – The last connection attempt failed.