User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 251 of 825
Ceragon Proprietary and Confidential
Table 37: Signal Level PMs
Parameter
Definition
Interval
For 24-hour intervals, displays the date of the interval. For 15-
minute intervals, displays the date and ending time of the interval.
Max TSL (dBm)
The maximum TSL (Transmit Signal Level) that was measured
during the interval.
Min TSL (dBm)
The minimum TSL (Transmit Signal Level) that was measured
during the interval.
Max RSL (dBm)
The maximum RSL (Received Signal Level) that was measured
during the interval.
Min RSL (dBm)
The minimum RSL (Received Signal Level) that was measured
during the interval.
TSL exceed threshold
seconds
The number of seconds the measured TSL exceeded the threshold
during the interval. TSL thresholds are configured in the Radio
Thresholds page. See
Configuring BER Thresholds and Displaying
RSL exceed threshold1
seconds
The number of seconds the measured RSL exceeded RSL threshold
1 during the interval. RSL thresholds are configured in the Radio
Thresholds page. See
Configuring BER Thresholds and Displaying
RSL exceed threshold2
seconds
The number of seconds the measured RSL exceeded RSL threshold
2 during the interval. RSL thresholds are configured in the Radio
Thresholds page. See
Configuring BER Thresholds and Displaying
Integrity
Indicates whether the values received at the time and date of the
measured interval are reliable. An x in the column indicates that
the values are not reliable due to a possible power surge or power
failure that occurred at that time.
To set the Signal Level PM thresholds, click
Thresholds
. The Signal Level
Thresholds Configuration
–
Edit Page opens. Set the thresholds, described in
, and click
Apply
.
Figure 185: Signal Level Thresholds Configuration
–
Edit Page
