User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 662 of 825
Ceragon Proprietary and Confidential
19.2.5.3
Displaying Local Unit Management Information (CLI)
To display the local unit's management information, enter the following command
in root view:
root> ethernet lldp local-mng-show
The following information is displayed:
•
Mng Addr SubType
- The format of the local unit's IP Address. In this release,
only IPV4 is supported.
•
Management Address
- The local unit's IP address.
•
Mng Addr Length
- Reserved for future use.
•
Mng Addr IF SubType
- Reserved for future use.
•
Mng Addr IF
- Reserved for future use.
•
Mng Addr OID
- Reserved for future use.
19.2.5.4
Displaying Local Unit Management Information per Port (CLI)
To display the local unit's management information per port, enter the following
command in root view:
root> ethernet lldp mng-addr-table-show
The following information is displayed:
•
Interface type/slot/port
- The port type, slot number, and port number.
•
Dest Mac Address
- Defines the MAC address associated with the port for
purposes of LLDP transmissions.
•
Mng Address subType
- Defines the type of the management address
identifier encoding used for the Management Address. In this release, only
IpV4 is supported.
•
Management Address
- The unit's IP address.
•
Mng Address Tx Enable
- Indicates whether the unit's Management Address is
transmitted with LLDPDUs. In this release, the Management Address is always
sent.
19.2.5.5
Displaying Unit’s Destination MAC Addresses
(CLI)
To display the destination MAC address or range of MAC addresses associated
with the unit, and their internal index, enter the following command in root view:
root> ethernet lldp mac-da-table-show
The following information is displayed:
•
LLDP DA Index
- The internal index associated with the unit's destination LLDP
MAC address.
•
LLDP DA
- The unit's destination LLDP MAC address.
