Chapter 6 Tutorials
OLT2406 User’s Guide
77
The settings in this tutorial are as the following.
1
Access the OLT through
http://192.168.1.1
by default. Log into the OLT by entering the username
(default:
admin
) and password (default:
1234
).
2
Go to
Advanced Application
>
VLAN
>
Static VLAN
, and create a VLAN with ID of 100. Add ports 10, 11
and 12 in the VLAN by selecting
Fixed
in the
Control
field as shown.
Deselect
Tx Tagging
because you don’t want outgoing traffic to contain this VLAN tag.
Click
Add
.
Figure 45
Tutorial: Create a VLAN and Add Ports to It
3
Go to
Advanced Application
>
VLAN
>
VLAN Configuration
>
VLAN Port Setting
, and set the PVID of the
ports 10, 11 and 12 to 100. This tags untagged incoming frames on ports 10, 11 and 12 with the tag 100.
Table 14 Tutorial: Settings in this Tutorial
HOST
PORT CONNECTED
VLAN
PVID
DHCP SNOOPING PORT TRUSTED
DHCP Server (
A
)
10
1 and 100
100
Yes
DHCP Client (
B
)
11
1 and 100
100
No
DHCP Client (
C
)
12
1 and 100
100
No
Summary of Contents for OLT2406
