ZyXEL Communications OLT2406, User Manual

Page: 453 / 766

OLT2406 User’s Guide
453
Figure 252 Protocol Based VLAN Application Example
56.13.1 Protocol Based VLAN Commands
The following section lists the commands for this feature.
Table 225 Protocol Based VLAN Commands
COMMAND DESCRIPTION M P
show interfaces config < aid >
protocol-based-vlan
Displays the protocol based VLAN settings for
the specified port(s).
aid
:
slot-< slot > | <ge|msc|pon>-< slot >-
< port >
E 3
interface port-channel < aid >
Enters sub-command mode for configuring the
specified ports.
aid
:
slot-< slot > | <ge|msc|pon>-< slot >-
< port >
C 13
protocol-based-vlan name
< name > ethernet-type < ether-
num |ip|ipx|arp|rarp|appletalk|
decnet> vlan < vlan-id >
priority <0-7>
Creates a protocol based VLAN with the
specified parameters.
name
: Use up to 32 alphanumeric characters.
ether-num
: If you don’t select a predefined
Ethernet protocol (
ip
,
ipx
,
arp
,
rarp
,
appletalk
or
decnet
), type the protocol
number in hexadecimal notation with a prefix,
“0x”. For example, type “0x0800” for the IP
protocol and type “0x8137” for the Novell IPX
protocol.
Note: Protocols in the hexadecimal
number range 0x0000 to 0x05ff are
not allowed.
priority
: Specify the IEEE 802.1p priority that
the OLT assigns to frames belonging to this VLAN.
C 13