ZyXEL Communications OLT2406, User Manual

Page: 436 / 766

Chapter 55 IPv6
OLT2406 User’s Guide
436
55.3 IPv6 Command Examples
This example shows how to enable IPv6 in VLAN 1 and display the link-local address the OLT
automatically generated and other IPv6 information for the VLAN.
This example shows how to manually configure two IPv6 addresses (one uses the EUI-64 format, one
doesn’t) in VLAN 1, and then display the result. Before using
ipv6 address
commands, you have to
enable IPv6 in the VLAN and this has the OLT generate a link-local address for the interface.
OLT2406# config
OLT2406(config)# vlan 1
OLT2406(config-vlan)# ipv6
OLT2406(config-vlan)# exit
OLT2406(config)# exit
OLT2406# show ipv6 vlan 1
VLAN : 1 (VLAN1)
IPv6 is enabled.
MTU is 1500 bytes.
ICMP error messages limited to 10 every 100 milliseconds.
Stateless Address Autoconfiguration is disabled.
Link-Local address is fe80::219:cbff:fe6f:9159 [preferred]
Global unicast address(es):
Joined group address(es):
ff02::2
ff01::1
ff02::1
ff02::1:ff6f:9159
ND DAD is enabled, number of DAD attempts: 1
ND NS-interval is 1000 milliseconds
ND reachable time is 30000 milliseconds
ND router advertised managed config flag is disable
ND router advertised other config flag is disable
ND router advertisements are sent every 200 to 600 seconds
ND router advertisements lifetime 1800 seconds