ZyXEL Communications OLT2406, User Manual

Page: 646 / 766

Chapter 93 OLT Configuration
OLT2406 User’s Guide
646
C
HAPTER
93
OLT Configuration
93.1 Overview
Use these commands to configure settings on a line card port interface.
93.2 OLT Configuration Commands
This table lists commands for OLT settings.
Table 348 OLT Configuration Commands
COMMAND DESCRIPTION M P
interface olt < aid >
Sets OLT configuration for the specified
interface.
aid
:
pon -< slot >-< port >
C 13
O7-state < sn >
Has the ONT with the specified serial number
enter Emergency Stop State (O7). Emergency
Stop State is a ONU state defined in ITUT G.983. In
this state, ONU will stop its transceiver output
until the OLT requests it to exit from the state.
sn
: ONT serial number, 16 characters.
C 13
bip-err-th < threshold >
Sets the threshold for Bit Interleaved Parity (BIP)
errors.
threshold
: 0~4294967295
C 13
exit
Leaves from the configuration commands. C 13
fec <0|1>
Enables the Forward Error Correction (FEC)
feature.
0: disable
1: enable
C 13
fec-corr-byte-th < threshold >
Sets the FEC corrected byte threshold.
threshold
: 0~4294967295
C 13
fec-corr-code-word-th < threshold >
Sets the FEC corrected code word threshold.
threshold
: 0~4294967295
C 13
fec-uncorr-code-word-th < threshold >
Sets the FEC uncorrected code word threshold.
threshold
: 0~4294967295
C 13
inactive
Inactivates the OLT PON port. C 13