ZyXEL Communications OLT2406, User Manual

Page: 431 / 766

Chapter 55 IPv6
OLT2406 User’s Guide
431
Figure 249 MLD Snooping-Proxy Example
55.2 IPv6 Commands
The following section lists the commands for this feature.
1
2
3
4
5
6
7
8
9
X
Done
Query
Report
DSL
Table 211 ipv6 address Commands
COMMAND DESCRIPTION M P
vlan <1-4094>
Enters config-vlan mode for the specified VLAN.
Creates the VLAN, if necessary. C 13
ipv6
Globally enables IPv6 in this VLAN. The OLT then
creates a link-local address automatically. Use
“
show ipv6
” to see the generated address.
C 13
ipv6 address < ipv6-address >/
< prefix >
Manually configures a static IPv6 global address
for the VLAN. C 13
ipv6 address < ipv6-address >/
< prefix > eui-64
Manually configures a static IPv6 global address
for the VLAN and have the interface ID be
generated automatically using the EUI-64
format. C 13
ipv6 address < ipv6-address >/
< prefix > link-local
Manually configures a static IPv6 link-local
address for the VLAN. C 13
ipv6 address autoconfig
Use the command to have the OLT generate an
IPv6 global address automatically in this VLAN
after the OLT obtains the VLAN network
information from a router.
Note: Make sure an IPv6 router is available
in the VLAN network before using this
command on the OLT.
C 13