ZyXEL Communications OLT2406, User Manual

Page: 497 / 766

Chapter 69 Port Authentication
OLT2406 User’s Guide
497
69.3 Port Authentication Command Examples
Activate 802.1X port authentication.
Configure 802.1X port access authentication on port ge-5-1.
Configure port ge-5-1 to attempt to authenticate client(s) a maximum of 4 times before sending
unresponsive ports to the guest VLAN.
Configure port ge-5-1 to remain in the HELD state and rejects further authentication requests from the
client for 120 seconds after a failed authentication exchange.
Configure port ge-5-1 to wait 30 seconds for the client's response to the challenge request before
sending a request again.
Configure port ge-5-1 to wait 30 seconds before re-sending an identity request to clients on the listed
ports.
port-access-authenticator < aid >
guest-vlan Host-mode Multi-secure
[<1-24>]
Sets the OLT to authenticate each client that
connects to the listed ports. Optionally, sets the
maximum number of the clients that the OLT
authenticates on the port(s). C 13
show port-access-authenticator
Displays all port authentication settings. E 3
show port-access-authenticator
< aid >
Displays port authentication settings on the
specified port(s). E 3
Table 252 Port Authentication Commands (continued)
COMMAND DESCRIPTION M P
OLT2406# config
OLT2406(config)# port-access-authenticator
OLT2406# config
OLT2406(config)# port-access-authenticator ge-5-1
OLT2406# config
OLT2406(config)# port-access-authenticator ge-5-1 max-req 4
OLT2406# config
OLT2406(config)# port-access-authenticator ge-5-1 quiet-period 120
OLT2406# config
OLT2406(config)# port-access-authenticator ge-5-1 supp-timeout 30
OLT2406# config
OLT2406(config)# port-access-authenticator ge-5-1 tx-period 30