ZyXEL Communications OLT2406, User Manual

Page: 574 / 766

OLT2406 User’s Guide
574
78.8 ONT Subscriber VoIP Port Provisioning Example
The VoIP function is on the ONT, not the OLT. The OLT uses OMCI to configure VoIP settings on the ONT.
The ONT must support receiving VoIP configuration by OMCI.
Figure 274 PMG5318 VoIP Example Overview
This example uses VLAN 20 for VoIP traffic and configures ge-5-1 to link to a PMG5318 and msc-1-1 as an
uplink port that links to a SIP server at IP address 192.168.21.10.
1
Configure a VLAN 20 with the ge-5-1 PON (slot 5, port 1) and msc-1-1 uplink port (port 1 on the active
MSC no matter which slot it is in) as fixed members.
2
Configure the QoS bandwidth and ingress profiles.
• bwprof: configure a “100m” QoS bandwidth profile that sets the SIR to 10240 kbps and limits the AIR to
10240 kbps and the PIR to 102400 kbps.
• ingprof: configure a “alltc1” QoS ingress profile to map IEEE 802.1p tags 0 to 7 to traffic class 1.
3
Configure VoIP SIP, common, and dial plan profiles.
• The “sip” VoIP SIP profile sets 192.168.21.10 as the registrar server’s IP address.
• Create the “common” VoIP common profile without any settings.
• Create the “dial” plan profile with an entry that defines the following dialing rules:
• The first rule is before the | (bar) symbol. It has the PMG5318 dial a call when users dial a 1 followed
by any number of digits from 0 to 9, an asterisks (*), any number of digits from 0 to 9, and the pound
key (#).
PMG5318
OLT
SIP
Server
IP: 192.168.21.10
VLAN: 20
msc-1-1 ge-5-1
Phone 1
account: 812202
ONT
SIP 1
OLT2406# config
OLT2406(config)# vlan 20
OLT2406(config-vlan)# fixed ge-5-1
OLT2406(config-vlan)# fixed msc-1-1
OLT2406(config-vlan)# untagged msc-1-1
OLT2406(config-vlan)# exit
OLT2406(config)# interface port-channel msc-1-1
OLT2406(config-interface)# pvid 20
OLT2406(config)# exit
OLT2406# config
OLT2406(config)# qos bwprof 100m sir 10240 air 10240 pir 102400
OLT2406(config)# qos ingprof alltc1 dot1p0tc 1 dot1p1tc 1 dot1p2tc 1 dot1p3tc 1
dot1p4tc 1 dot1p5tc 1 dot1p6tc 1 dot1p7tc 1
OLT2406(config)# exit