
Chapter 75 VLAN Stacking and Translation
OLT2406 User’s Guide
528
• If the VLAN stacking port role is access port, then the OLT adds the SP TPID tag to all incoming frames
on the service provider's edge devices (1 and 2 in the VLAN stacking example figure).
Priority refers to the IEEE 802.1p standard that allows the service provider to prioritize traffic based on the
class of service (CoS) the customer has paid for.
• On the OLT, configure priority level of the inner IEEE 802.1Q tag.
• “0” is the lowest priority level and “7” is the highest priority level.
VID is the VLAN ID. SP VID is the VID for the second (Service provider’s) VLAN tag.
75.3.1 Frame Format
The frame format for an untagged Ethernet frame, a single-tagged 802.1Q frame (Customer) and a
“double-tagged” 802.1Q frame (Service provider) is shown next.
75.4 Port-based Q-in-Q
Port-based Q-in-Q lets the OLT treat all frames received on the same port as the same VLAN flows and
add the same outer VLAN tag to them, even if they have different customer VLAN IDs.
75.5 Selective Q-in-Q
Selective Q-in-Q is VLAN-based. It allows the OLT to add different outer VLAN tags to the incoming
frames received on one port according to their inner VLAN tags.
Note: Selective Q-in-Q rules are only applied to single-tagged frames received on the access
ports. If the incoming frames are untagged or single-tagged but received on a tunnel
port or cannot match any selective Q-in-Q rules, the OLT applies the port-based Q-in-Q
rules to them.
Table 269 Single and Double Tagged 802.11Q Frame Format
DA
SA
Len/Etype Data FCS
Untagged Ethernet
frame
DA
SA
TPID
Priority
VID
Len/Etype Data FCS
IEEE 802.1Q customer
tagged frame
DA SA
SPTPID
Priority
VID
TPID
Priority VID
Len/Etype Data FCS
Double-tagged
frame
Table 270 802.1Q Frame
DA
Destination Address
Priority
802.1p Priority
SA
Source Address
Len/Etype
Length and type of Ethernet frame
(SP)TPID
(Service Provider) Tag Protocol IDentifier
Data
Frame data
VID
VLAN ID
FCS
Frame Check Sequence
Summary of Contents for OLT2406
