ZyXEL Communications OLT2406, User Manual

Page: 729 / 766

Chapter 109 Troubleshooting
OLT2406 User’s Guide
729
finally finds the rogue ONT with a serial number of 414C434C00050017 and blocks all of its upstream
traffic.
While a rogue ONT discovery is in progress, you can use the
stop
command to terminate the discovery
process at any time. This command also has the OLT add all ONTs back into the accepted ONT list. But if
any ONT still transmits traffic at the wrong time, the OLT will block all the PON port’s ONT traffic again.
OLT2406# test interface olt rogue pon-5-1
OLT2406(config-rogue)# start 1000
Prepare Rogue Detection Process........
Stop SN Acquisition........
Scan Pre-Registered Onu........
Start Rogue Detection Process........
Processing Information, Please Wait ........
OLT2406(config-rogue)#
Rogue Detection Process (II)........
Search Alive ONUs........
===========Discover New ONT=======================
<pon-5-1>
Serial number:414C434C25004992
password :44454641554C54000000
=================================================
Get ONU Alarm Indication LOFi status: clear on ont-5-1-102
===========Discover New ONT=======================
<pon-5-1>
Serial number:5A59584500000011
password :44454641554C54000000
=================================================
Testing Rogue Candidates........
OLT2406(config-rogue)#
===========Discover New ONT=======================
<pon-5-1>
Serial number:5A59584500000011
password :44454641554C54000000
=================================================
<Rogue Onu Test Result>
=============================================
- Serial Number : 41 4C 43 4C 00 05 00 17
- password : 44 45 46 41 55 4C 54 4D 44 55
=============================================
Stop Rogue Detection Process........
OLT2406(config-rogue)# stop
Stop Rogue Detection Process........
OLT2406(config-rogue)#