manualshive.com logo in svg

ZyXEL Communications OLT2406, User Manual

Share
Download
ZyXEL Communications OLT2406 User Manual Download Page 313

 Chapter 38 ONT Template

OLT2406 User’s Guide

313

38.2.6  ONT ACL

Use this screen to assign an identification number to an ACL profile, and associate the ACL profile with 
an ONT template. To apply an ONT template to an ONT, go to the 

Advanced

 

Application

 > 

ONT Quick 

Setup 

screen.

Click 

ONT ACL

 in the 

Advanced Application

 > 

ONT Template

 screen to display the screen as shown.

Note: An ONT can accept up to 16 ACL profiles.

Sip-profile

Select the SIP profile to apply to have this VoIP rule apply. Click 

Voip-Sip-Profile

 to view the profile 

details.

Username

Type 1 to 25 characters for the user name used for VoIP authentication.

Password

Type 1 to 25 printable characters for the password used for VoIP authentication.

Dial-plan

Select the dial plan profile to apply to this VoIP rule. Click 

Voip-Dial-Plan 

to view the profile details.

Aor

Type the user identification part of the address of record (from 1 to 63 characters).

Dispname

Type the customer ID (up to 25 characters) used for the display attribute in outgoing SIP 
messages.

Vmail-uri

Enter the IP address or URL (up to 63 characters) of the SIP voicemail server for signaling 
messages.

Vmail-extimer

Enter the voicemail subscription expiration time (from 0 to 3600 seconds).

Release-timer

Enter the release timer (from 0 to 30 seconds).

Roh-timer

Enter the time (from 0 to 30 seconds) for deciding the receiver is off hook.

Add

Click 

Add

 to add a UNI port VoIP entry.

Cancel

Click 

Cancel

 to clear the fields. 

Clear

Click 

Clear 

to return the screen’s settings to the defaults.

Index

This is the index number of a UNI port VoIP rule.

AID

This is the UNI port’s ID in the format: uniport-<pon>-<ont>-<card>-<port>.

Active

This displays whether the VoIP rule is active (

Y

) or not (

N

).

VID

This displays the VLAN ID the UNI port uses for VoIP traffic.

Rule

This displays the VoIP rule settings for UNI ports.

Delete

Select this for one or more entries and click 

Delete

 to remove them.

*

Select this to select all of the entries for deletion. 

Delete

Click 

Delete

 to remove the entries with the 

Delete

 option selected.

Cancel

Click 

Cancel

 to begin configuring the screen again.

Table 136   Advanced Application > ONT Template > Uniport VoIP

LABEL

DESCRIPTION

Summary of Contents for OLT2406































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands