
Chapter 53 Provisioning User Interfaces
OLT2406 User’s Guide
410
6
Use the
remote uniport <aid>
command to configure settings on a card type and an ONT’s Ethernet
interface.
<aid>: uniport-<slot>-<pon>-<ont>-<card>-<port>
7
Configure a VLAN (10 in this example) with the PON port (slot 6, PON port 1 in this example) and uplink
port (port 1) as fixed members. Use “ge” for a PON or Gigabit Ethernet port. Use “msc-1-
<port>
” for an
uplink port (use “msc-1-” no matter which slot the active MSC is in). This example uses port 1.
Note: The OLT will always configure the ONT to send out US packets with VLAN tag. The PON
port must always be configured as egress tagged.
OLT2406# show interfaces olt pon-6-1 status
AID | State Key_Exchange SN_Acq Rogue_Detect Rogue_Destruct Proc_Interval Proc_Interval_Sec LOS
----------------------+------------------------------------------------------------------------------------------------------
pon-6-1 | ACTIVE Enable Enable Disable Disable 8000 86400 ON
+------------------------------------------------------------------------------------------------------
| Details
+------------------------------------------------------------------------------------------------------
| (Optical Statistics) Last 8 (bytes): 4
| (Optical Statistics) End of burst offset: 15
| Protocol Configuration:
| Min round trip propagation delay(ms) : 0 Min ONU response time (ms) : 9
| Number of EqD measurement cycles : 5 Power level mode(0=0db,1=3db,2=6db) : 0
| Drift control interval : 1000 Drift control limit : 4
| Number of guard bits : 64 SR DBA reporting block size : 48
| Multicast port encryption conf : enable US BER interval : 5000
| DS BER interval : 5000 BER SF threahold : 7
| BER SD threshold : 8 ACK timeout : 2000
| PLS max allocation size : 120 Number of tx preamble : 0x00001810
| Type 3 preamble pattern : 0xaa PON link include US FEC : disable
| Key exchange : enable Password request : enable
| Disable onu after discovery : false Transmission control limit : 8
| Protection switch timeout : 0 LOS GPIO Pin : 65535
| Deactivate When Password Auth Fail : enable Key exchange for encrypted ports : disable
| los initial value : off :
|
| Link Configuration:
| Max round trip propagation delay(ms) : 200 Max onu response time(ms) : 50
| Preassigned EqD (0-up) : 0 LOS alpha : 4
| LOF alpha : 4 LOAM alpha : 3
| Delimiter min ED threshold(0x0-0x28) : 0x0 Delimiter max ED threshold(0x0-0x28) : 0x29
| Delimiter window size(0x0-0x7F) : 0x45 ED pattern : 0xaa
| ED size (0-2) : 0 ED window size(0x0-0x80) : 0x80
| BCDR resync pattern size(0x0-0x1F) : 0x3 BCDR ranging pattern size(0x0-0x1F) : 0x8
| BCDR Resync location(0x6-0xA0) : 0x28 BCDR Resync polarity(low|high) : low
| BCDR Ranging polarity(low|high) : low LA resync pattern size (0x0-0x7F) : 0x8
| LA ranging pattern size (0x0-0x7F) : 0x10 LA Resync location (0x6-0xA0) : 0x25
| LA Resync polarity(low|high) : high LA Ranging polarity(low|high) : high
| Wait window size (0x0-0x7F) : 0x0 Ranging access window size(0x0-0x7F) : 0xf
| ED inversion(true|false) : false LA Medial Value(enable|disable) : disable
| LA Pin Select(ttl|pecl) : ttl DS FEC mode(enable|disable) : disable
| Delimiter length by bits(8,16,20,24) : 20 Idle Port Id : 0
| Idle Port Status : disable Delimiter ED source : BCDR
| Ranging ED source : BCDR
| BCDR resync pattern in HEX : 0xFFFF0000000000
| LA resync pattern in HEX : 0xFFFFFFFFFFFFF00000000
| BCDR ranging pattern : 0xFFFF0000000000
| LA ranging pattern in HEX : 0xFFFFFFFFFFFFFFF0000000
| Delimiter pattern : 0xB5983
|
| Link type : LUMINENT A
| Link status : 2 Link mode : 0
| Anti Mac Spoofing : disable
----------------------+------------------------------------------------------------------------------------------------------
OLT2406# show remote ont ont-6-1-101 bwgroup
----------------------+----+--------+-------------------+----------------------------------+---------------------------------
AID | ID | Status | | Upstream | Downstream
----------------------+----+--------+-------------------+----------------------------------+---------------------------------
ont-6-1-101 | 1 | IS | Bandwidth profile | 1G | 1G
| | | SIR | 1024 kbps | 1024 kbps
| | | AIR | 2048 kbps | 2048 kbps
| | | AIR | 102400 kbps | 102400 kbps
| | | AllocId | 256 |
| | +-------------------+----------------------------------+---------------------------------
| | | GEM port | 260 261 262 263
----------------------+----+--------+-------------------+----------------------------------+---------------------------------
Summary of Contents for OLT2406
