ZyXEL Communications OLT2406, User Manual

Page: 491 / 766

Chapter 68 Link Aggregation
OLT2406 User’s Guide
491
68.4 Link Aggregation Commands Examples
This example activates trunk 1 and places ports msc-1-1 and msc-1-2 in the trunk using static link
aggregation.
This example disables trunk one (T1) and removes ports msc-1-3 and msc-1-4 from trunk two (T2).
This example displays the current trunks.
The following table describes the labels.
no lacp
Disables the link aggregation control protocol
(Dynamic trunking) on the OLT. C 13
lacp system-priority <1-65535>
Sets the priority of an active port using LACP. C 13
Table 249 LACP Commands (continued)
COMMAND DESCRIPTION M P
OLT2406(config)# trunk T1
OLT2406(config)# trunk T1 interface msc-1-1&&-2
OLT2406(config)# no trunk T1
OLT2406(config)# no trunk T2 interface msc-1-3&&-4
OLT2406(config)# exit
OLT2406# show trunk
Group ID T1: active
Criteria : src-dst-mac
Status: LACP
Member number: 2 Member: [msc-1-1]-[msc-1-2]
Group ID T2: active
Criteria : src-dst-mac
Status: Static
Member number: 2 Member: [msc-1-3]-[msc-1-4]
Table 250 Show Trunk Labels
LABEL DESCRIPTION
Group ID This field displays the trunk ID number and the current status.
inactive: This trunk is disabled.
active: This trunk is enabled.
Status This field displays how the ports were added to the trunk.
-: The trunk is disabled.
Static: The ports are static members of the trunk.
LACP: The ports joined the trunk via LACP.