ZyXEL Communications OLT2406, User Manual

Page: 484 / 766

OLT2406 User’s Guide
484
C
HAPTER
66
Broadcast Storm Control
66.1 Broadcast Storm Control Overview
Use these commands to configure broadcast storm control on the OLT.
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure (DLF)
packets the OLT receives per second on the ports. When the maximum number of allowable broadcast,
multicast and/or DLF packets is reached per second, the subsequent packets are discarded. Enable this
feature to reduce broadcast, multicast and/or DLF packets in your network. You can specify limits for
each packet type on each port.
66.2 Broadcast Storm Control Commands
The following table describes the related commands.
Table 243 Broadcast Storm Control Commands
COMMAND DESCRIPTION M P
storm-control
Enables traffic storm control on the OLT. C 13
no storm-control
Disables traffic storm control on the OLT. C 13
show interfaces config < aid >
bstorm-control
Displays the storm control status on the specified
port.
aid
:
slot-< slot > | <ge|msc|pon>-< slot >-
< port >
E 3
show storm-control counter
Displays the storm control counters of the
specified port. E 3
clear storm-control counter
Clears the storm control counters of the
specified port. E 3
interface port-channel < aid >
Enters the sub-command mode for configuring
the specified ports
.
aid
:
<msc|ge|pon>-< slot >-< port >
C 13
broadcast-limit
Enables broadcast limits on the port. C 13
broadcast-limit < pkt/s >
Sets the number of broadcast packets the port
receives per second. C 13
multicast-limit
Enables multicast limits on the port. C 13
multicast-limit < pkt/s >
Sets the number of multicast packets the port
receives per second. C 13
dlf-limit
Enables DLF limits on the port. C 13
dlf-limit < pkt/s >
Sets the number of DLF packets the port
receives per second. C 13