ZyXEL Communications OLT2406, User Manual

Page: 626 / 766

Chapter 85 Access Control
OLT2406 User’s Guide
626
The following table describes the IP protocol numbers.
exit
Leaves the ACL profile editing sub-command
mode. C 0
no ont-acl-profile <profile-name>
Removes the specified ACL profile. C 13
no ont-acl-profile <cr>
Remove all ONT ACL profile(s). C 13
show ont-acl-profile [<profile-name>]
<cr>
Displays all or the specified ACL profile's settings. E 3
show ont-acl-profile <profile-name>
counter <cr>
Displays the dropped packet counters of the
specified ACL profile. E 3
show ont-acl-profile all counter <cr>
Displays the dropped packet counters of all ACL
profiles. E 3
show ont-acl-profile all counter filter
<spec1>,[<spec2>]
Displays the dropped packet counters of all ACL
profiles according to the filtering rules.
<spec1>
:
ont-<slot>-<pon>-<ont>
<spec2>
: non-zero-counter
E 3
clear hit-counter ont-acl <cr>
Clears the the hit packet counters of all ACL
profiles.
A hit packet matches the ACL profile.
E 13
clear hit-counter ont-acl <name>
Clears the hit packet counters of the specified
ACL profile.
A hit packet matches the ACL profile.
E 3
Table 331 List of IP Protocol Numbers
PROTOCOL
NUMBER
PROTOCOL
PROTOCOL
NUMBER
PROTOCOL
0 IPv6 Hop-by-Hop Option 74 Wang Span Network
1 Internet Control Message Protocol 75 Packet Video Protocol
2
Internet Group Management
Protocol 76 Backroom SATNET Monitoring
3
Gateway-to-Gateway Protocol 77 SUN ND PROTOCOL-Temporary
4
IP in IP 78 WIDEBAND Monitoring
5
Internet Stream Protocol 79 WIDEBAND EXPAK
6
Transmission Control Protocol 80 International Organization for
Standardization Internet Protocol
7 Core-based trees 81 Versatile Message Transaction
Protocol
8
Exterior Gateway Protocol 82 Secure Versatile Message
Transaction Protocol
9 Interior Gateway Protocol 83 VINES
10 BBN RCC Monitoring 84 • TTP
• Internet Protocol Traffic
Manager
11
Network Voice Protocol 85 NSFNET-IGP
12 Xerox PUP 86 Dissimilar Gateway Protocol
13 ARGUS 87 TCF
Table 330 Remote Management Commands (continued)
COMMAND DESCRIPTION M P