ZyXEL Communications OLT2406, User Manual

Page: 111 / 766

Chapter 9 VLAN
OLT2406 User’s Guide
111
Figure 68 Advanced Application > VLAN > VLAN Detail
The following table describes the labels in this screen.
9.3 Configure VLAN Port Settings
Use the VLAN Port Setup screen to configure the static VLAN (IEEE 802.1Q) settings on a port. Click the
VLAN Port Setting link in the VLAN Status screen.
Table 24 Advanced Application > VLAN > VLAN Detail
LABEL DESCRIPTION
VLAN Status Click this to go to the VLAN Status screen.
VID This is the VLAN identification number that was configured in the Static VLAN screen.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is marked as T , an
untagged port is marked as U and ports not participating in a VLAN are marked as “ – “.
See Table 29 on page 120 for more detailed information.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the OLT.
Dynamic : using GVRP
Static : added as a permanent entry