ZyXEL Communications OLT2406, User Manual

Page: 707 / 766

Chapter 102 PPPoE IA
OLT2406 User’s Guide
707
test pppoe-client start < aid >
username < username > password
< password > vlan < snisvid > [snicvid
<1-4094>] [ nnisvid <1-4094> ] [
univid <1-4094> ] [ ontid <1-128> ]
[ ontcardid <1-16> ] [ uniport <1-
128> ] [ ontsn < 16 hex numbers > ] [
timeout <10-300> ]
Starts a PPPoE client test to simulate the ONT
creating a PPPoE session and getting an IP
address from the PPPoE server. Up to 1 session
can be simulated at a time.
aid
:
<ge|pon>-< slot >-< port >
username
: the user name of the PPPoE account,
length 1-32
password
: the password of the PPPoE account,
length 1-32
snisvid
: Choose SNI SVID on subscriber port
(ONT), 1-4094. This is the outer VLAN on the
service node interface.
snicvid
: SNI CVID setting on subscriber port
(ONT), 1-4094. If not set and PPPoE IA needs this
value, it will show 4096. This is the inner VLAN on
the service node interface.
nnisvid
: NNI SVID setting on subscriber port
(ONT), 1-4094. If not set and PPPoE IA needs this
value, it will show 4096. This is the outer VLAN on
the network to network interface.
univid
: UNI VID setting on subscriber port (ONT),
1-4094. If not set and PPPoE IA needs this value, it
will show 4096. This is the (outer) VLAN on the
user node interface.
ontid
: ONT ID to be added to the PPPoE IA
information, 1-128
ontcardid
: ONTCARD ID to be added to the
PPPoE IA information, 1-16
uniport
: UNIPORT value to be added to the
PPPoE IA information, 1-128
ontsn
: ONT serial number to be added to the
PPPoE IA information, 16 HEX characters long
timeout
: timeout value for the simulation. 10-
300 seconds, default value: 30 seconds
E 13
test pppoe-client start help
Provides more information about the specified
command. E 13
test pppoe-client status
Displays the PPPoE client simulation results. E 13
test pppoe-client stop
Stops the PPPoE client test. E 13
Table 371 PPPoE Intermediate Agent Commands (continued)
COMMAND DESCRIPTION M P