ZyXEL Communications OLT2406, User Manual

Page: 538 / 766

Chapter 76 Multicast
OLT2406 User’s Guide
538
clear multicast port all
Removes all multicast port counters. E 3
clear multicast port < port-list >
Remove the specified multicast port counter. E 13
show igmpchannel counter
Displays the IGMP channel counter. E 13
show igmp-snooping
Displays the IGMP snooping settings. E 3
show multicast port < cr >
Displays all multicast port counters. E 3
show multicast port <ge|msc|pon>-
<slot>-<port>
Displays the specified multicast port counters. E 3
show multicast port query
Displays the port query packet counter. E 13
show multicast port receive
Displays the port received packet counter. E 13
show multicast port report
Displays the port report packet counter. E 13
show multicast port specific all
Displays all port transmit packet counters. E 13
show multicast port specific
<ge|msc|pon>-<slot>-<port>
Displays the specified port’s transmit packet
counters. E 13
show multicast snooping-vlan
Displays the IGMP snooping VLAN settings. E 3
show multicast join-port
Displays multicast group member information. E 3
show multicast querier-source-IP
Displays the IP address of the device which sent
the multicast queries. E 3
show multicast vlan
Displays the multicast per VLAN counter. E 13
interface port-channel < aid >
Enters the sub-commands for configuring the
specified interface.
aid
:
<msc|ge|pon>-< slot >-< port >
C 13
igmp-immediate-leave
Enables the OLT to remove this port from the
multicast tree when an IGMP version 2 leave
message is received on this port.
Select this option if there is only one host
connected to this port.
C 13
igmp-querier-mode
<auto|fixed|edge>
Enables IGMP query mode on the specified port. C 13
igmpchannel < uni-vid > active
<on|off> fullviewpkg
< packages > maxgroup < num >
maxmsg < num >
Configures IGMP channels limitations per VLAN.
active
: Activates/deactivates this IGMP
channel limitation.
fullviewpkg
: Configures a list of package
members with full view privilege. That is, IGMP
clients can join groups in these package
members all the time. Use the mcast-channel
command to create the package members.
maxgroup
: <0-512>. The maximum number of
multicast groups a client can join concurrently.
maxmsg
: <0-255>. The maximum number of
IGMP reports a client can send per second.
C 13
exit
Exits from interface port channel sub
commands. C 13
show multicast mode-querier
Displays IGMP querier mode settings. E 3
show igmpchannel
Displays IGMP channel’s status. E 3
Table 275 igmp-snooping/multicast Commands (continued)
COMMAND DESCRIPTION M P