ZyXEL Communications OLT2406, User Manual

Page: 602 / 766

OLT2406 User’s Guide
602
ip ospf authentication null
Uses this command so authentication won’t be
used for OSPF. C 13
ip ospf authentication-key
< key >
Specifies the authentication key for OSPF. C 13
no ip ospf authentication-key
< key >
Resets the OSPF authentication key in this
routing domain to default. C 13
ip ospf cost <1-65535>
Sets the OSPF cost in this routing domain. C 13
no ip ospf cost <1-65535>
Resets the OSPF cost in the routing domain to
default. C 13
ip ospf retransmit-interval
<3 1 -65535>
Sets the OSPF retransmission interval in this
routing domain. C 13
no ip ospf retransmit-interval
Resets the OSPF retransmission interval in this
routing domain to default. C 13
ip ospf transmit-delay <1-
65535>
Sets the OSPF transmission delay in this routing
domain. C 13
no ip ospf transmit-delay
Resets the OSPF transmission delay in this routing
domain to default. C 13
ip ospf dead-interval <1-
65535>
Sets the OSPF dead interval in this routing
domain. C 13
no ip ospf dead-interval
Resets the OSPF dead interval in this routing
domain to default. C 13
ip ospf hello-interval <1-
65535>
Sets the OSPF hello interval in this routing
domain. C 13
no ip ospf hello-interval
Resets the OSPF hello interval in this routing
domain to default. C 13
ip ospf message-digest-key
< keyid > md5 <key>
Sets the OSPF authentication key in this routing
domain. C 13
ip ospf priority <0-255>
Sets the OSPF priority for the interface. Setting
this value to 0 means that this router will not
participate in router elections. C 13
no ip ospf priority <0-255>
Resets the OSPF priority for the interface. C 13
router ospf < router-id >
Enables and enters the OSPF configuration
mode. C 13
area < area-id >
Enables and sets the area ID. C 13
no area < area-id >
Removes the specified area. C 13
area < area-id > authentication
Enables simple authentication for the area. C 13
area < area-id > authentication
message-digest
Enables MD5 authentication for the area. C 13
no area < area-id >
authentication
Sets the area to use no authentication (None). C 13
area <area-i d> default-cost
<0-16777215>
Sets the cost to the area. C 13
no area < area-id > default-cost
Sets the area to use the default cost (15). C 13
area < area-id > name < name >
Sets a descriptive name for the area for
identification purposes. C 13
area < area-id > stub
Enables and sets the area as a stub area. C 13
no area < area-id > stub
Disables stub network settings in the area. C 13
Table 313 OSPF Command Summary (continued)
COMMAND DESCRIPTION M P