ZyXEL Communications OLT2406, User Manual

Page: 670 / 766

Chapter 96 Remote ONT
OLT2406 User’s Guide
670
disp upgrade-status <aid> <cr>
Displays the firmware upgrades’ status of:
• The ONTs that connect to the specified port
• The specified ONT
Displays the firmware upgrade status of the
specified ONT.
aid: slot-<slot> | pon-<slot>-<pon> |
ont-<slot>-<pon>-<ont>
One of the following results appears:
• MATHCED : The ONT’s planned version and
running firmware version are identical.
• Downloading : The ONT is downloading the
latest firmware from the OLT. The image
version of the ONT firmware file uploaded to
the OLT and the ONT’s planned version are
identical.
• Failed : The ONT didn’t upgrade firmware
successfully.
• Failed with ONU Down : The ONT didn’t
upgrade firmware successfully, because the
optical network of the ONT is down.
• Not found the matching image : The ONT
didn’t upgrade firmware successfully,
because the image version of the ONT
firmware file uploaded to the OLT and the
ONT’s planned version are not identical.
• No planned version : The ONT’s planned
version hasn’t configured yet.
• Timeout : The ONT didn’t upgrade firmware
successfully, because there was no response
from the OLT.
• ONU not ready : The ONT didn’t upgrade
firmware successfully, because the ONT is
not ready.
• SWDL queue full : The ONT didn’t upgrade
firmware successfully, because the waiting
queue is full.
• In waiting queue : The ONT is in the waiting
queue, and waiting for the firmware
upgrade process to begin.
• Change to image(1) / (2) : Image 1/2 is in use
now for the ONT’s running firmware,
because the ONT’s planned version and
image 1/2 firmware version are identical.
• No Image : No ONT firmware file is uploaded
to the OLT.
• Already successful : This message only
appears when you’re checking the ONTs
firmware upgrades status of the specified
port. An ONT has already upgraded
firmware successfully.
• Already changed to image (1) / (2) : This
message only appears when you’re
checking the ONTs firmware upgrades status
of the specified port. Image 1/2 is in use now
for the ONT’s running firmware, because the
ONT’s planned version and image 1/2
firmware version are identical.
E 13
disp upgrade-status <cr>
Displays the firmware upgrades’ status of all
connected ONTs. E 13
release-image <cr>
Removes the ONT firmware file uploaded to the
OLT. This will release more volatile memory on
the OLT. E 13
COMMAND DESCRIPTION M P