Chapter 21 Classifier
OLT2406 User’s Guide
177
21.2.1 Viewing and Editing Classifier Configuration Summary
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the
Classifier
screen. To change the settings of a rule, click a number in the
Index
field.
Note: When two rules conflict with each other, a higher layer rule has priority over lower layer
rule.
Figure 111
Advanced Application > Classifier > Classifier Configuration: Summary Table
The following table describes the labels in this screen.
The following table shows some other common Ethernet types and the corresponding protocol number.
Socket
Number
Note: You must select either
UDP
or
TCP
in the
IP Protocol
field before you configure the
socket numbers.
Select
Any
to apply the rule to all TCP/UDP protocol port numbers or select the second option and
enter a TCP/UDP protocol port number. Refer to
for more information.
Add
Click
Add
to insert the entry in the summary table below and save your changes to the OLT’s run-time
memory. The OLT loses these changes if it is turned off or loses power, so use the
Save
link on the top
navigation panel to save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to reset the fields back to your previous configuration.
Clear
Click
Clear
to set the above fields back to the factory defaults.
Table 57 Advanced Application > Classifier (continued)
LABEL
DESCRIPTION
Table 58 Advanced Application > Classifier > Classifier Configuration: Summary Table
LABEL
DESCRIPTION
Index
This field displays the index number of the rule. Click an index number to edit the rule.
Active
This field displays
Yes
when the rule is activated and
No
when it is deactivated.
Name
This field displays the descriptive name for this rule. This is for identification purpose only.
Rule
This field displays a summary of the classifier rule’s settings.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the check boxes.
Table 59 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE
PROTOCOL NUMBER
IP ETHII
0800
X.75 Internet
0801
NBS Internet
0802
ECMA Internet
0803
Chaosnet
0804
Summary of Contents for OLT2406
