ZyXEL Communications OLT2406, User Manual

Page: 570 / 766

Chapter 78 VoIP
OLT2406 User’s Guide
570
78.5 UNI Port VoIP Service Settings
The following table lists the commands for configuring VoIP service settings for a subscriber port on the
remote ONT. The remote ONT must also support the VoIP services you configure for it.
Table 297 UNI Port VoIP Service Commands
COMMAND DESCRIPTION M P
remote uniport < aid >
Configures UNI port settings.
aid
:
uniport-< slot >-< pon >-< ont >-< card >-
< port >
C 13
voip-service mode sip
vlan <1-4094>
common-profile < name >
sip-profile < name >
[dial-plan < name >]
[username < name >]
[password < password >]
[aor < url >]
[disp-name <name>]
[vmail-url < uri >]
[vmail-extimer <0~3600>]
[release-timer <0~30>]
[roh-timer <0~30>]
Configures UNI port VoIP settings.
mode
:
sip
mode (SIP) is supported.
vlan
: Specify the VLAN ID (1 to 4094) for the UNI
port to use for VoIP traffic.
common-profile
: Specify the name of an
existing SIP common profile.
sip-profile
: Specify the name of an existing
SIP profile.
dial-plan
: Specify the name of an existing dial
plan table.
username
: The username (from 1 to 25
characters) for VoIP authentication.
password
: The password (from 1 to 25
characters) for VoIP authentication.
aor
: The user identification part of the address of
record (from 1 to 63 characters).
disp-name
: The customer ID used for the display
attribute in outgoing SIP messages (from 1 to 25
characters).
vmail-url
: The IP address or URL (from 1 to 63
characters) of the SIP voicemail server for
signaling messages.
vmail-extimer
: The voicemail subscription
expiration time (from 0 to 3600) in seconds
(default 3600).
release-timer
: The release timer (from 0 to 30)
defined in seconds (default 10).
roh-timer
: The time (from 0 to 30) in seconds
for deciding the receiver is off hook (default is
15).
C 13
voip-service help
Provides more information about the specified
command. C 13