Chapter 4 The Web Configurator
OLT2406 User’s Guide
70
5
Misconfigure the text configuration file.
6
Forget the password and/or IP address.
7
Prevent all services from accessing the OLT.
8
Change a service port number but forget it.
Note: Be careful not to lock yourself and others out of the OLT.
4.6 Resetting the OLT
If you lock yourself (and others) from the OLT or forget the administrator password, you will need to
reload the factory-default configuration file or reset the OLT back to the factory defaults.
4.6.1 Reload the Configuration File
Uploading the factory-default configuration file replaces the current configuration file with the factory-
default configuration file. This means that you will lose all previous configurations and the speed of the
console port will be reset to the default of 115200 bps with 8 data bits, no parity, one stop bit and flow
control set to none. The password will also be reset to “1234”. The default in-band management IP
address will be reset to 192.168.1.1 and the default out-of-band (management port) IP address to
192.168.0.1.
To upload the configuration file, do the following:
1
Connect to the console port using a computer with terminal emulation software.
2
Disconnect and reconnect the OLT’s power to begin a session. When you reconnect the OLT’s power,
you will see the initial screen.
3
When you see the message “
Press any key to enter Debug Mode within 1 seconds...
” press
any key to enter debug mode.
4
Type
atlc
after the “
Enter Debug Mode
” message.
5
Wait for the “
Starting XMODEM upload
” message before activating XMODEM upload on your
terminal.
6
After a configuration file upload, type
atgo
to restart the OLT.
The OLT is now reinitialized with a default configuration file including the default password of “1234”.
4.7 Logging Out of the Web Configurator
Click
Logout
in a screen to exit the web configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.
Summary of Contents for OLT2406
