ZyXEL Communications OLT2406, User Manual

Page: 105 / 766

Chapter 8 Basic Setting
OLT2406 User’s Guide
105
Figure 65 Basic Setting > Port Setup
The following table describes the labels in this screen.
Table 21 Basic Setting > Port Setup
LABEL DESCRIPTION
Port Bridge Enables the per-port port bridge feature on the OLT.
The per-port port bridge feature enables the ONTs connected to the same PON port to
communicate with each other.
Note: The port bridge feature only works on the PON ports of the OLT.
Port This is the port index number.
* means all ports.
An entry that starts with eth is for an Ethernet port.
An entry that starts with pon is for a GPON port.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable a port. The factory default for all ports is enabled. A port must be
enabled for data transmission to occur.