ZyXEL Communications OLT2406, User Manual

Page: 667 / 766

Chapter 96 Remote ONT
OLT2406 User’s Guide
667
show remote ont < cr >
Displays all ONT information. E 3
show remote ont filter < slot -< aid >
| pon -< aid > | < serial number > | is
| oos-nr .. >
Displays the status of ONTs matching the filter
you specify.
slot-< slot >
: Show ONT information by slot.
pon-< aid >
: Show ONT information by PON port.
is
: Show ONTs with an IS (In Service) status.
oos
: Show ONTs with an OOS (Out Of Service)
status.
oos-lo
: Show ONTs with a Line Card Out Of
Service status.
oos-nr
: Show ONTs with an Out Of Service Not
Registered status.
oos-cd
: Show ONTs with an Out Of Service
OMCC Down status.
oos-np
: Show ONTs with an Out Of Service Not
Provisioned status.
oos-ad
: Show ONTs with an Out Of Service
Admin Down status.
oos-op
: Show ONTs with an Out Of Service
Operation Down status.
E 3
show remote ont summary
Displays a summary of ONT status. E 3
show remote ont unreg
Displays unregistered ONT status information. E 3
show remote ont template < aid >
Displays ONT template information for the
specified template.
aid : slot-< slot > | pon-<slot>-
< pon > | ont-< slot >-< pon >-<121~128>
E 13
show remote ont template
Displays all ONT template information. E 3
show remote ont < aid > status-
history
Displays the ONU status history.
aid : ont-< slot >-< pon >-< ont >
E 13
show remote ont < aid > wan-status
Displays the ONT WAN status.
aid : ont-< slot >-< pon >-< ont >
E 13
remote ont < aid > onu-
reset[<1>|<2>]
Resets the ONU.
1: Load factory default
2: Reset default
aid : ont- <slot>-<pon>-<ont> | pon-
<slot>-<pon>
E 13
remote ont < aid > config-status
Gets the ONT’s current configuration status.
aid : ont- <slot>-<pon>-<ont> | pon-
<slot>-<pon>
E 13
ont-alarm-profile < name >
Sets the ONT alarm profile name.
name
: up to 32 ASCII characters
C 13
Table 352 Remote ONT Commands (continued)
COMMAND DESCRIPTION M P