ZyXEL Communications OLT2406, User Manual

Page: 525 / 766

Chapter 74 Queuing Method
OLT2406 User’s Guide
525
74.3 Port by Port Queuing Command Examples
This example configures WFQ on port 5 on the active MSC and assigns weight values (1,2,3,4,12,13,14,15)
to the physical queues (Q0 to Q8).
74.4 System-Wide Queuing Commands
The following section lists the commands for this feature.
74.5 System-Wide Queuing Command Examples
This example assigns weight values (1, 2, 3, 4, 12, 13, 14, and 15) to the physical queues (Q0 to Q8) on
port 5 on the active MSC.
This example configures Gigabit port 1 in slot 6 to use SPQ.
OLT2406(config)# interface port-channel msc-1-5
OLT2406(config-interface)# wfq
OLT2406(config-interface)# weight 1 2 3 4 12 13 14 15
Table 267 System-Wide Queuing Commands
COMMAND DESCRIPTION M P
queue priority <0-7> level <0-7>
Sets the IEEE 802.1p priority level-to-physical
queue mapping.
priority <0-7>
: IEEE 802.1p defines up to eight
separate traffic types by inserting a tag into a
MAC-layer frame that contains bits to define
class of service. Frames without an explicit
priority tag are given the default priority of the
ingress port.
level <0-7>
: The OLT has up to seven physical
queues that you can map to the eight priority
levels. On the OLT, traffic assigned to higher
index queues gets through faster while traffic in
lower index queues will be dropped if the
network is congested.
C 13
OLT2406(config)# interface port-channel msc-1-5
OLT2406(config-interface)# weight 1 2 3 4 12 13 14 15
OLT2406(config)# interface port-channel ge-6-1
OLT2406(config-interface)# spq