ZyXEL Communications OLT2406, User Manual

Page: 582 / 766

Chapter 79 PON DDMI
OLT2406 User’s Guide
582
C
HAPTER
79
PON DDMI
79.1 Overview
This chapter shows you how to configure profiles of ONT alarm thresholds. You can also view the SFP
transceiver information and operating parameters.
79.2 PON DDMI Commands
The following section lists the commands for this feature.
Table 300 PON DDMI Commands
COMMAND DESCRIPTION M P
interface transceiver-ddmi < aid >
Enters sub-command mode for configuring the
interface transceiver threshold settings.
aid : <ge|msc|pon>-< slot >-< port >
C 13
tlimit [alarm < high > < low >]
[warn < high > < low >]
Sets the temperature alarm and/or warning
threshold.
value range <-128 ~ 128> Units: degrees Celsius
C
C 13
vlimit [alarm < high > < low >]
[warn < high > < low >]
Sets the voltage alarm and/or warning
threshold.
value range <0 ~ 6.55> Units: volts
C 13
blimit [alarm < high > < low >]
[warn < high > < low >]
Sets the bias current alarm and/or warning
threshold.
value range <0 ~ 131> Units: mA
C 13
txlimit [alarm < high > < low >]
[warn < high > < low >]
Sets the transmission power alarm and/or
warning threshold.
value range <-40 ~ 8.2> Units: dbm
C 13
rxlimit [alarm < high > < low >]
[warn < high > < low >]
Sets the receive power alarm and/or warning
threshold.
value range <-40 ~ 8.2> Units: dbm
C 13
no inactive
Activates the interface transceiver threshold
configuration. C 13
inactive
Disables the interface transceiver threshold
configuration. C 13