manualshive.com logo in svg

ZyXEL Communications OLT2406, User Manual

Share
Download
ZyXEL Communications OLT2406 User Manual Download Page 325

 Chapter 39 ONT Quick Setup

OLT2406 User’s Guide

325

39.8  The ONT Storm/DDOS/Loopguard Screen

Use this screen to view the status of storm control, DDoS, and loop guard on an ONT.

Click 

Storm/DDOS/Loopguard

 in the 

Advanced Application 

> 

ONT Quick Setup

 screen to display the 

screen as shown.

Figure 199   

Advanced Application > ONT Quick Setup > Storm/DDOS/Loopguard

The following table describes the labels in this screen.

Auto get IP

This field displays whether the ONT is using a DHCP IP address or a static IP address.

Enable

 - The WAN interface can obtain an IP address from a DHCP server.

Disable

 - The WAN interface is using a static IP address.

IP address

This field displays the current IP address of the ONT in the WAN.

IP Mask

This field displays the current subnet mask in the WAN.

Gateway

This field displays the IP address of the default gateway.

Primary DNS

This field displays the first DNS server address assigned by the ISP.

Second DNS

This field displays the second DNS server address assigned by the ISP.

Paging

Prev/Next

Click 

Prev

 or 

Next

 to show the previous/next screen if all status information cannot be seen in one 

screen.

Table 147   Advanced Application > ONT Quick Setup > Wan

LABEL

DESCRIPTION

Table 148   Advanced Application > ONT Quick Setup > Storm/DDOS/Loopguard

LABEL

DESCRIPTION

This is the identifier for the GPON interface.

ONT AID

This field displays the ONT’s ID.

Storm Control 
Threshold

This field displays the maximum rate in packets per second (pps) that packets are allowed to 
arrive at the remote ONT.

You can configure the rate in the 

Storm Threshold

 field of the 

Advanced Application

 > 

ONT 

Template

 screen.

Broadcast 
Over Threshold

This field displays the maximum number of unknown broadcast packets can be received on the 
remote ONT.

When the limit of unknown broadcast packets is reached, the remote ONT will drop the unknown 
broadcast packets.

You can configure the rate in the 

Storm Threshold

 field of the 

Advanced Application

 > 

ONT 

Template

 screen.

Summary of Contents for OLT2406































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands