ZyXEL Communications OLT2406, User Manual

Page: 546 / 766

Chapter 76 Multicast
OLT2406 User’s Guide
546
76.9 MVR Group Configuration
All source ports and receiver ports belonging to a multicast group can receive multicast data sent to this
multicast group.
Configure MVR IP multicast group address(es) by the
group
command under
mvr <vlan-id>
.
Note: A port can belong to more than one multicast VLAN. However, IP multicast group
addresses in different multicast VLANs cannot overlap.
name < name-str >
Sets the MVR name for identification purposes.
name-str
: 1-32 English keyboard characters
C 13
receiver-port < aid >
Sets the receiver port(s). An MVR receiver port
can only receive multicast traffic in a multicast
VLAN.
aid
:
<ge|msc>-< slot >-< port >
C 13
source-port < aid >
Sets the source port(s). An MVR source port can
send and receive multicast traffic in a multicast
VLAN. C 13
tagged < aid >
Sets the port(s) to tag VLAN tags. C 13
no mvr < vlan-id >
Removes an MVR configuration of the specified
VLAN from the OLT. C 13
no group < name-str >
Removes the specified MVR multicast group. C 13
no inactive
Enables the MVR settings. C 13
no receiver-port <ge|msc>-<slot>-<port>
Disables the receiver port(s). An MVR receiver
port can only receive multicast traffic in a
multicast VLAN. C 13
no source-port <ge|msc>-<slot>-<port>
Disables the source port(s). An MVR source port
can send and receive multicast traffic in a
multicast VLAN. C 13
no tagged <ge|msc>-<slot>-<port>
Sets the port(s) to untag VLAN tags. C 13
Table 279 General MVR Configuration Commands (continued)
COMMAND DESCRIPTION
OLT2406# show mvr 10
MVLAN: 10 Active: Yes Mode: Dynamic 802.1p Priority: 0
Name:
Source Port: msc-1-1, msc-1-2, msc-1-3, msc-1-4
Receiver Port:
Tagged Port: msc-1-1, msc-1-2, msc-1-3, msc-1-4
MVR Group Configuration:
Name Start Address End Address
-------------------------------- --------------- ---------------
A0 224.1.1.1 224.1.1.255