ZyXEL Communications OLT2406, User Manual

Page: 432 / 766

Chapter 55 IPv6
OLT2406 User’s Guide
432
ipv6 address default-gateway
< gateway-ipv6-address >
Sets the default gateway for the VLAN. When an
interface cannot find a routing information for a
frame’s destination, it forwards the packet to
the default gateway. C 13
no ipv6
Disables IPv6 in this VLAN. C 13
no ipv6 address < ipv6-
address >/< prefix >
Removes a specified static global address. C 13
no ipv6 address < ipv6-
address >/< prefix > eui-64
Removes a specified static global address
whose interface ID was generated using the
EUI-64 format. C 13
no ipv6 address autoconfig
Disables IPv6 address autoconfiguration in this
VLAN. C 13
no ipv6 address default-
gateway
Removes the default gateway address for this
VLAN. C 13
no ipv6 address dhcp client
Disables the DHCP client feature in this VLAN. C 13
no ipv6 address dhcp client
option
Sets the OLT to not obtain the DNS server
information from the DHCP server. C 13
show ipv6
Displays IPv6 settings in all VLANs on the OLT. E 0
default-management <in-band|out-
of-band>
Sets through which traffic flow (in-band or out-
of-band) the OLT sends packets originating from
itself (such as SNMP traps) or packets with
unknown source.
in-band:
IP interfaces that can be accessed
through GE-1 ~ GE-6 uplink port or OLT PON, GE
ports in GE line card. These are the ports for
regular customer services.
out-of-band:
IP interfaces that can be
accessed through the management port. The
port is not used for regular customer service.
C 13
restart ipv6 dhcp client vlan <1-
4094>
Sets the OLT to send a release message for the
assigned IPv6 address to the DHCP server and
start the DHCP message exchange again. E 13
Table 211 ipv6 address Commands (continued)
COMMAND DESCRIPTION M P