7 - 6
T U N
Effects of changing the jet needle (refer-
ence)
(Diameter of the straight portion)
Changing the diameter of the straight portion
adjusts the air-fuel mixture when the throttle is
1/8 to 1/4 open.
È
Idle
É
Fully open
1/4
1/2
3/4
+10%
Q
–10%
P
R
È
É
Leak jet adjustment (accelerator pump
adjustment)
The leak jet
1
is a setting part that adjusts the
flow of fuel discharged by the accelerator
pump. Since the accelerator pump operates
only when throttle is open, the leak jet is used
to adjust a fuel mixture ratio for quick throttle
opening and is therefore different from other
setting parts that adjust a fuel mixture for each
throttle opening (each engine speed).
1. The engine breathes hard in quick throttle
opening.
Select a leak jet having lower calibrating
No. than standard to enrich the mixture.
<Example> #60
→
#55
2. Rough engine operation is felt in quick
throttle opening.
Select a leak jet having higher calibrating
No. than standard to lean out the mixture.
<Example> #60
→
#65
Standard leak jet
#60
1
SETTING
Summary of Contents for WR450F
Page 674: ...5 68 CHAS 8 Install Plastic band Taillight coupler Locking tie REAR SHOCK ABSORBER ...
Page 792: ......
Page 793: ......