Yamaha WR450F, Owner'S Service Manual

Page: 622 / 794

5 - 42
CHAS
HANDLEBAR
3. Tighten:
• Nut [handlebar holder (lower)]
1
T
R
.
.
34 Nm (3.4 m · kg, 24 ft · lb)
4. Install:
• Grip (left)
1
Apply the adhesive to the handlebar
2
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
• Install the grip (left) to the handlebar so that
the line
b
between the two arrow marks
faces straight upward.
5. Install:
• Grip (right)
1
• Collar
2
Apply the adhesive on the tube guide
3
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the tube guide surface
a
with a lacquer thinner.
• Install the grip to the tube guide so that the
grip match mark
b
and tube guide slot
c
form the angle as shown.
R
L
64˚
3
1
b
c