Yamaha WR450F, Owner'S Service Manual

Page: 672 / 794

5 - 67
CHAS
REAR SHOCK ABSORBER
2. Install:
• Bush
1
• Collar
2
• Dust seal
3
NOTE:
• Apply the molybdenum disulfide grease on
the bearing and dust seal lips.
• Install the dust seals with their lips facing out-
ward.
3. Install:
• Rear shock absorber
4. Install:
• Bolt (rear shock absorber-frame)
1
• Washer
2
• Nut (rear shock absorber-frame)
3
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
• Bolt (rear shock absorber-relay arm)
1
• Nut (rear shock absorber-relay arm)
2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
1
2
3
M
T
R .
.
56 Nm (5.6 m · kg, 40 ft · lb)
T
R
.
.
53 Nm (5.3 m · kg, 38 ft · lb)
6. Install:
• Rear frame
1
• Bolt [rear frame (upper)]
2
• Bolt [rear frame (lower)]
3
T
R
.
.
38 Nm (3.8 m · kg, 27 ft · lb)
T
R
.
.
32 Nm (3.2 m · kg, 23 ft · lb)
7. Tighten:
• Screw (air filter joint)
1
T
R
.
.
3 Nm (0.3 m · kg, 2.2 ft · lb)