Omron SYSDRIVE 3G3FV, User Manual, Page: 94 / 400

3-14
Item Valid access levels Min.
Units
Output signal
levels for
multi-function
analog outputs
Function Display Item
Flux
Vec-
tor
Open
Vec-
tor
V/f
w/PG
V/f
Min.
Units
Output signal
levels for
multi-function
analog outputs
Function Display
U1-25 DI-16 Reference Monitors the reference value from a
3G3FV-PDI16H2 Digital Command Card.
The value will be displayed in binary or
BCD depending on parameter F3-01.
Can’t be output. --- A A A A
U1-26 Voltage Ref (Vq) Monitors the Inverter’s internal voltage
reference value for the motor’s secon-
dary current control. 10 V: 200 (400) VAC
(0 to
±
10 V possible)
0.1 V X X A A
U1-27 Voltage Ref (Vd) Monitors the Inverter’s internal voltage
reference value for the motor’s excitation
current control. 10 V: 200 (400) VAC
(0 to
±
10 V possible)
0.1 V X X A A
U1-28 CPU ID Manufacturer’s CPU software ID number Can’t be output. 0.1 V A A A A
U1-32 ACR(q) Output Monitor’s the current control output value
for the motor’s secondary current. 10 V: 100% 0.1% X X A A
U1-33 ACR(d) Output Monitor’s the current control output value
for the motor’s excitation current. 10 V: 100% 0.1% X X A A
U1-34 OPE Detected Displays the first constant number for
which an OPE error was detected. Can’t be output. --- A A A A
U1-35 Zero Servo Pulse Multiplies the number of PG pulses by
four to display the movement width at the
zero servo stop point. Can’t be output. 1 X X X A
U1-36 PID Input PID ref PID reference bias – PID
feedback value
The max. frequency corresponds to
100%. 10 V:
Max. frequency 0.01
% A A A A
U1-37 PID Output PID control output
The max. frequency corresponds to
100%. 10 V:
Max. frequency 0.01
% A A A A
U1-38 PID Setpoint PID ref PID reference bias
The max. frequency corresponds to
100%. 10 V:
Max. frequency 0.01
% A A A A
Preparing for Operation
Chapter 3