Omron SYSDRIVE 3G3FV, User Manual, Page: 291 / 400

7-3
7-1 Initialize Mode Parameters
Para
meter
Name Description Setting
range
Default
setting
Chang
e d r
Control mode Page
meter
No.
Display
name
range setting e dur-
ing
opera-
tion
V/f
control
V/f
with
PG
Open
loop
vector
Flux
vector
A1-00 Display
Language Used to select the language
displayed on the Digital
Operator
0:
English
1: Japanese
2: German
3: French
0 to 6 1 OK Q Q Q Q 3-18
Select
Language
3: French
4: Italian
5: Spanish
6: Portuguese
Note: This parameter is not ini-
tialized by the initialize
operation.
A1-01 Access
Level Used to set the parameter
access level (set/read.)
0:
Monitoring only (Displays
only Operation mode and
Initialize mode)
1: Used to select user
0 to 4 2 OK Q Q Q Q 3-18
Access
Level
1: Used to select user
parameter
(Parameters A2-01 to A2-32
only can be set/read.)
2: QUICK-START
3: BASIC
4: ADVANCED
A1-02 Select
Control
Method Used to select the control
method for the Inverter
0:
V/f control
1: V/f with PG
2: Open loop vector
3 Fl
0 to 3 2 NO Q Q Q Q 3-19
Control
Method
O e oo ecto
3: Flux vector
Note: This parameter is not ini-
tialized by the initialize
operation.
A1-03
Initialize
Used to initialize the parameters
using the specified method.
0:
No initializing
1110: Initializes using the
0 to
3330 0 NO Q Q Q Q 3-20
Init
Parameters
1110: Initializes using the
User parameters
2220: Initializes using a
two-wire sequence.
3330: Initializes using a
three-wire sequence.
A1-04 Password When a password has been set
in A1-05 this function write
protects the password input
section of the Operation mode
parameter.
Note: If the password is 0 to
9999 0 NO Q Q Q Q 3-22
Enter
Password
Note: If the password is
changed, parameters
A1-01 to A1-03 and A2-01
to A2-32 can no longer be
changed. (Program mode
parameters can be
changed.)
Parameter Lists
Chapter 7